Focused Ion Beam/Scanning Electron Microscope TESCAN LYRA3 (LYRA)

Profilová karta (PDF)

Detailed description:

SEM/FIB is a type of microscope where a focused electron/ion beam is scanned over the sample to generate an image of the surface or to modify it with nanometric resolution (usually better than 10 nm). The image is formed by detecting secondary and backscattered electrons emitted from the impact place of particle beam. The Gas Injection System (GIS) provides a gas inlet for gaseous precursors, thus allowing deposition and enhanced or selective etching on the sample surface using advanced surface chemistry. The microscope is equipped with two closed loop nanomanipulators (optionally two more can be installed), which allows measurement of 2-probe or 4-probe current-voltage characteristics. The tool is equipped with Electron Dispersive X-Ray spectroscopy analyser (EDX) for elemental analysis. Applications include positive/negative lithography, sample imaging and modification, electrical measurements and basic chemical and elemental analysis.

Publications:

• NOVCIC, K.; IFFELSBERGER, C.; NG, S.; PUMERA, M., 2021: Local electrochemical activity of transition metal dichalcogenides and their heterojunctions on 3D-printed nanocarbon surfaces. NANOSCALE 13(10), p. 5324 - 9, doi: 10.1039/d0nr06679f; FULL TEXT
  (LYRA, KRATOS-XPS)
• Michlicek, M; Blahova, L; Dvorakova, E; Necas, D; Zajickova, L, 2021: Deposition penetration depth and sticking probability in plasma polymerization of cyclopropylamine. APPLIED SURFACE SCIENCE 540, doi: 10.1016/j.apsusc.2020.147979; FULL TEXT
  (WOOLLAM-VIS, LYRA, FTIR, KRATOS-XPS)
• Zadorozhnii, O., 2021: Exchange bias in metamagnetic heterostructures. MASTER´S THESIS , p. 1 - 81; FULL TEXT
  (MAGNETRON, VERSALAB, KERR-MICROSCOPE, RAITH, RIE-FLUORINE, LYRA, UHV-DEPOSITION, UHV-PREPARATION, UHV-XPS)
• REDONDO NEGRETE, E.; PUMERA, M., 2021: MXene-functionalised 3D-printed electrodes for electrochemical capacitors. ELECTROCHEMISTRY COMMUNICATIONS 124, p. 1 - 6, doi: 10.1016/j.elecom.2021.106920; FULL TEXT
  (LYRA, KRATOS-XPS, WITEC-RAMAN)
• Vinogradov, A.; Heczko, M.; Mazánová, V.; Linderov, M.; Kruml, T., 2021: Kinetics of cyclically-induced mechanical twinning in γ-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy. ACTA MATERIALIA 212, doi: 10.1016/j.actamat.2021.116921; FULL TEXT
  (LYRA, TITAN)

• Vaňatka, M., 2021: Static and dynamic properties of nanostructured magnetic materials. PH.D. THESIS , p. 1 - 113
  (VERSALAB, VNA-MPI, TITAN, BRILLOUIN, MIRA, RAITH, KERR-MICROSCOPE, MAGNETRON, EVAPORATOR, VERIOS, WIRE-BONDER, LYRA)
• Muñoz, J.; Redondo, E.; Pumera, M., 2021: Bistable (Supra)molecular Switches on 3D-Printed Responsive Interfaces with Electrical Readout. ACS APPLIED MATERIALS & INTERFACES 13(11), p. 12649 - 12655, doi: 10.1021/acsami.0c14487; FULL TEXT
  (KRATOS-XPS, LYRA)
• WANG, L.; GAO, W.; NG, S.; PUMERA, M., 2021: Chiral Protein-Covalent Organic Framework 3D-Printed Structures as Chiral Biosensors. ANALYTICAL CHEMISTRY 93(12), p. 5277 - 7, doi: 10.1021/acs.analchem.1c00322; FULL TEXT
  (VERIOS, KRATOS-XPS, LYRA)
• Komarov, P.; Jech, D.; Tkachenko, S.; Slámečka, K.; Dvořák, K.; Čelko, L., 2021: Wetting Behavior of Wear-Resistant WC-Co-Cr Cermet Coatings Produced by HVOF: The Role of Chemical Composition and Surface Roughness. JOURNAL OF THERMAL SPRAY TECHNOLOGY , doi: 10.1007/s11666-020-01130-6
  (LYRA, KRATOS-XPS, SEE-SYSTEM)
• MUNOZ MARTIN, J.; REDONDO NEGRETE, E.; PUMERA, M., 2021: Chiral 3D-printed Bioelectrodes. ADVANCED FUNCTIONAL MATERIALS 31(16), p. 2010608-1 - 9, doi: 10.1002/adfm.202010608; FULL TEXT
  (LYRA, KRATOS-XPS, WITEC-RAMAN)
• GAO, W.; PUMERA, M., 2021: 3D Printed Nanocarbon Frameworks for Li-Ion Battery Cathodes. ADVANCED FUNCTIONAL MATERIALS , p. 2007285-1 - 10, doi: 10.1002/adfm.202007285; FULL TEXT
  (VERIOS, LYRA, KRATOS-XPS)
• ŠŤASTNÝ, P.; CHLUP, Z.; ČÁSTKOVÁ, K.; TRUNEC, M., 2021: High strength alumina tapes prepared by gel-tape casting method. CERAMICS INTERNATIONAL 47(5), p. 6988 - 8, doi: 10.1016/j.ceramint.2020.11.048; FULL TEXT
  (VERIOS, LYRA)
• OLIVER, C.; IBANEZ, R.; FLORES-MERINO, M.; VOJTOVÁ, L.; ŠALPLACHTA, J.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E., 2021: Lyophilized Polyvinylpyrrolidone Hydrogel for Culture of Human Oral Mucosa Stem Cells. MATERIALS 14(1), p. 1 - 14, doi: 10.3390/ma14010227; FULL TEXT
  (FTIR, WITEC-RAMAN, LYRA)
• ŠIMŮNKOVÁ, H.; LEDNICKÝ, T.; WHITEHEAD, A.; KALINA, L.; ŠIMŮNEK, P.; HUBÁLEK, J., 2021: Tantalum-based nanotube arrays via porous-alumina-assisted electrodeposition from ionic liquid: Formation and electrical characterization. . APPLIED SURFACE SCIENCE 548, p. 149264 - 10, doi: 10.1016/j.apsusc.2021.149264; FULL TEXT
  (LYRA, ICON-SPM)
• Hren, I.; Michna, S.; Svobodova, J.; Michnova, L.; Benes, L., 2020: Analysis of the defects occurrence on the functional surfaces of individual mould segments for the tyre production from AlSi7Mg0.3Sr. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , p. 3474 - 10, doi: 10.1177/0954406220916479; FULL TEXT
  (HELIOS, LYRA, TITAN, RIGAKU3)
• SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L., 2020: Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. SURFACE AND COATINGS TECHNOLOGY 384, p. 1 - 13, doi: 10.1016/j.surfcoat.2019.125328; FULL TEXT
  (LYRA)
• Mouralova, K.; Benes, L.; Bednar, J.; Zahradnicek, R.; Prokes, T.; Fiala, Z.; Fries, J., 2020: Precision Machining of Nimonic C 263 Super AlloyUsing WEDM. COATINGS, MDPI 10(6), p. 590-1 - 590-20, doi: 10.3390/coatings10060590
  (LYRA, TEGRAMIN, TITAN, DEKTAK, HELIOS)
• Casas Luna, M., 2020: Structure and properties of Hydroxyapatite-Magnesium composites produced by the means of current assisted infiltration sintering. PH.D. THESIS , p. 1 - 128; FULL TEXT
  (LYRA, RIGAKU3, micro-CT-L240)
• Mouralova, K.; Benes, L.; Zahradnicek, R.; Bednar, J.; Zadera, A.; Fries, J.; Kana, V., 2020: WEDM used for machining high entropy alloys. MATERIALS 13(21), p. 4823-1 - 4823-20, doi: 10.3390/ma13214823
  (LYRA, TEGRAMIN, DEKTAK, HELIOS, TITAN)
• Mouralova, K.; Benes, L.; Prokes, T.; Bednar, J.; Zahradnicek, R.; Jankovych, R.; Fries, J.; Vontor, J., 2020: Analysis of the machinability of copper alloy ampcoloy by WEDM. MATERIALS 13(4), p. 893-1 - 893-14, doi: 10.3390/ma13040893
  (LYRA, TEGRAMIN, ICON-SPM, HELIOS, TITAN)
• LIU, X.; FECKO, P.; FOHLEROVÁ, Z.; PEKÁREK, J.; KARÁSEK, T.; NEUŽIL, P., 2020: Parylene Micropillars Coated with Thermally Grown SiO2. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B 38(6), p. 38 - 6, doi: 10.1116/6.0000558; FULL TEXT
  (SUSS-MA8, SUSS-RCD8, DWL, DRIE, RIE-FLUORINE, PARYLENE, XEF2, APCVD, LYRA)
• SOBOLA, D.; RAMAZANOV, S.; KONEČNÝ, M.; ORUDZHEV, F.; KASPAR, P.; PAPEŽ, N.; KNÁPEK, A.; POTOČEK, M., 2020: Complementary SEM-AFM of Swelling Bi-Fe-O Film on HOPG Substrate . MATERIALS 13(10), p. 1 - 15, doi: 10.3390/ma13102402; FULL TEXT
  (SIMS, WITEC-RAMAN, LITESCOPE, LYRA, KRATOS-XPS)
• Flajšman, L., 2020: Magneto-optical study of the dynamic properties of magnetic nanostructures and nanostructured metamaterials. PH.D. THESIS , p. 1 - 152; FULL TEXT
  (LYRA, KERR-MICROSCOPE, BRILLOUIN)
• Mouralova, K.; Bednar, J.; Benes, L.; Hrabec, P.; Kalivoda, M.; Fries, J., 2020: The analysis of EDM electrodes wear in corners and edges. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING 20(4), p. 130-1 - 130-14, doi: 10.1007/s43452-020-00137-8
  (LYRA, DEKTAK)
• FLAJŠMAN, L.; WAGNER, K.; VAŇATKA, M.; GLOSS, J.; KŘIŽÁKOVÁ, V.; SCHMID, M.; URBÁNEK, M.; SCHULTHEISS, H., 2020: Zero-field propagation of spin waves in waveguides prepared by focused ion beam direct writing. PHYSICAL REVIEW B 101(1), p. 014436-1 - 7, doi: 10.1103/PhysRevB.101.014436; FULL TEXT
  (KERR-MICROSCOPE, LYRA)
• Mouralova, K.; Zahradnicek, R.; Benes, L.; Prokes, T.; Hrdy, R.; Fries, J., 2020: Study of micro structural material changes after WEDM based on TEM lamella analysis. METALS 10(7), p. 949-1 - 949-17, doi: 10.3390/met10070949
  (TEGRAMIN, HELIOS, TITAN, LYRA)
• Habovštiaková, M., 2020: Electroerosion wire cutting of technical ceramics. MASTER´S THESIS , p. 1 - 83
  (LYRA, DEKTAK)
• MONTUFAR JIMENEZ, E.; TKACHENKO, S.; CASAS LUNA, M.; ŠKARVADA, P.; SLÁMEČKA, K.; DÍAZ DE LA TORRE, S.; KOUTNÝ, D.; PALOUŠEK, D.; KOLEDOVÁ, Z.; HERNÁNDEZ-TAPIA, L.; ZIKMUND, T.; ČELKO, L.; KAISER, J., 2020: Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. ADDITIVE MANUFACTURING , p. 1 - 13, doi: 10.1016/j.addma.2020.101516; FULL TEXT
  (LEICACOAT-STAN, LYRA, micro-CT-L240, RIGAKU3)
• Wojewoda, O.; Hula, T.; Flajsman, L.; Vanatka, M.; Gloss, J.; Holobradek, J.; Stano, M.; Stienen, S.; Korber, L.; Schultheiss, K.; Schmid, M.; Schultheiss, H.; Urbanek, M , 2020: Propagation of spin waves through a Neel domain wall. APPLIED PHYSICS LETTERS 117(2), p. 022405-1 - 5, doi: 10.1063/5.0013692; FULL TEXT
  (EVAPORATOR, KERR-MICROSCOPE, ICON-SPM, LYRA, BRILLOUIN, MIRA)
• Mouralova, K.; Prokes, T.; Benes, L., 2020: Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE 234(3), p. 721 - 733, doi: 10.1177/0954406219884974
  (LYRA, TEGRAMIN)
• Kudrna, T., 2020: Electroerosive sinking of technical ceramics. MASTER´S THESIS , p. 1 - 88
  (LYRA, DEKTAK)
• LIŠKA, J.; LIGMAJER, F.; PINHO NASCIMENTO, P.; KEJÍK, L.; KVAPIL, M.; DVOŘÁK, P.; HORKÝ, M.; LEITNER, N.; REIMHULT, E.; ŠIKOLA, T., 2020: Effect of deposition angle on fabrication of plasmonic gold nanocones and nanodiscs. MICROELECTRONIC ENGINEERING 228, p. 1 - 6, doi: 10.1016/j.mee.2020.111326; FULL TEXT
  (EVAPORATOR, LYRA, RIE-FLUORINE, MIRA, ICON-SPM)
• Que, Z.; Heczko, M.; Kuběna, I.; Seifert, H.P.; Spätig, P., 2020: Microstructural characterization of the synergic effects of dynamic strain ageing and hydrogen on fracture behaviour of low-alloy RPV steels in high-temperature water environments. MATERIALS CHARACTERIZATION 165, p. 110405-1 - 12, doi: 10.1016/j.matchar.2020.110405; FULL TEXT
  (HELIOS, LYRA)
• Zubáková, A., 2020: Electroerosion machining of materials used in the aerospace industry. MASTER´S THESIS , p. 1 - 62
  (LYRA, DEKTAK)
• Papez, N; Gajdos, A; Sobola, D; Dallaev, R; Macku, R; Skarvada, P; Grmela, L, 2020: Effect of gamma radiation on properties and performance of GaAs based solar cells. APPLIED SURFACE SCIENCE 527, p. 146766-1 - 146766-11, doi: 10.1016/j.apsusc.2020.146766
  (LYRA, WOOLLAM-VIS, SIMS, FTIR, WITEC-RAMAN)
• Čalkovský, V., 2020: Fabrication and characterization of GaN nanostuctures. TREATISE TO STATE DOCTORAL EXAM , p. 1 - 38
  (VERIOS, KRATOS-XPS, LYRA, TITAN)
• Líkař, M., 2020: Experimental electroerosion machining of special materials for aerospace industry. MASTER´S THESIS , p. 1 - 62
  (DEKTAK, LYRA)
• Remešová, M., 2020: Research and development of a technology of hard anodization of nonferrous alloys. PH.D. THESIS , p. 1 - 130
  (LYRA, LEICACOAT-STAN, HELIOS, TITAN, RIGAKU3)
• Macháčová, V., 2020: Analysis of results from experimental electrodischarge sinking of special materials for aerospace industry. MATER´S THESIS , p. 1 - 64
  (DEKTAK, LYRA, TEGRAMIN)
• CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L., 2020: Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. CERAMICS INTERNATIONAL 46(7), p. 8853 - 9, doi: 10.1016/j.ceramint.2019.12.130; FULL TEXT
  (LYRA, RIGAKU3)
• Mouralova, K.; Benes, L.; Prokes, T.; Bednar, J.; Zahradnicek, R.; Fries, J., 2020: Machining of pure molybdenum using WEDM. MEASUREMENT, JOURNAL OF THE INTERNATIONAL MEASUREMENT CONFEDERATION (IMEKO) 163, p. 108010-1 - 108010-13, doi: 10.1016/j.measurement.2020.108010
  (LYRA, TEGRAMIN, ICON-SPM, RIGAKU3)
• LEDNICKÝ, T.; BONYÁR, A., 2020: Large Scale Fabrication of Ordered Gold Nanoparticle-Epoxy Surface Nanocomposites and Their Application as Label-Free Plasmonic DNA Biosensors. ACS APPL MATER INTER 12(4), p. 4804 - 11, doi: 10.1021/acsami.9b20907; FULL TEXT
  (MAGNETRON, RIE-FLUORINE, VERIOS, LYRA, HELIOS, KRATOS-XPS)
• Robl, J., 2020: Application of Metal Additive Technology in Production of a Blisk for Turbine Engine of a Auxiliary Power Unit. MASTER´S THESIS , p. 1 - 81
  (LYRA)
• DRDLÍKOVÁ, K.; KLEMENT, R.; DRDLÍK, D.; GALUSEK, D.; MACA, K., 2020: Processing and properties of luminescent Cr3+ doped transparent alumina ceramics. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 40(7), p. 2573 - 8, doi: 10.1016/j.jeurceramsoc.2019.11.010; FULL TEXT
  (LYRA)
• Tinoco, HA.; Cardona, CI.; Marin-Berrio, MLF.; Garcia-Grisales, J.; Gomez, JP.; Roldan, SI.; Pena, FM.; Brinek, A.; Kalasova, D.; Kaiser, J.; Zikmund, T., 2020: Bio-structural monitoring of bone mineral alterations through electromechanical impedance measurements of a Piezo-device joined to a tooth. BIOMEDICAL ENGINEERING LETTERS , p. 603 - 15, doi: 10.1007/s13534-020-00170-9; FULL TEXT
  (micro-CT-L240, LYRA)
• Robl, J.; Sedlák, J.; Pokorný, Z.; Ňuksa, P.; Barényi, I.; Majerík, J., 2020: Analysis of advanced additive technology in direct metal laser sintering and precision casting method. BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES 68(1), p. 109 - 118, doi: 10.24425/bpasts.2020.131842
  (LYRA, HELIOS, TITAN)
• Vontor, J., 2020: Analysis of defects of copper alloy after wire electrical discharge machining. MASTER´S THESIS , p. 1 - 56
  (LYRA, TEGRAMIN, HELIOS, TITAN)
• REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J., 2020: Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. APPLIED SURFACE SCIENCE , p. 1 - 10, doi: 10.1016/j.apsusc.2020.145780; FULL TEXT
  (LYRA, TEGRAMIN, LEICACOAT-NANO)
• NĚMČÁKOVÁ, I.; BLAHOVÁ, L.; RYŠÁNEK, P.; BLANQUER, A.; BAČÁKOVÁ, L.; ZAJÍČKOVÁ, L., 2020: Behaviour of Vascular Smooth Muscle Cells on Amine Plasma-Coated Materials with Various Chemical Structures and Morphologies. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES 21(24), p. 1 - 24, doi: 10.3390/ijms21249467; FULL TEXT
  (KRATOS-XPS, LYRA, LEICACOAT-STAN, SEE-SYSTEM)
• Knapek, A; Dallaev, R; Burda, D; Sobola, D; Allaham, MM; Horacek, M; Kaspar, P; Matejka, M; Mousa, MS, 2020: Field Emission Properties of Polymer Graphite Tips Prepared by Membrane Electrochemical Etching. NANOMATERIALS 10(7), p. 1294-1 - 1294-12, doi: 10.3390/nano10071294
  (WITEC-RAMAN, LYRA)
• ROLEČEK, J.; PEJCHALOVÁ, L.; MARTÍNEZ-VÁZQUEZ, F.; MIRANDA GONZÁLEZ, P.; SALAMON, D., 2019: Bioceramic scaffolds fabrication: indirect 3D printing combined with ice-templating vs. robocasting. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 39(4), p. 1595 - 8, doi: 10.1016/j.jeurceramsoc.2018.12.006; FULL TEXT
  (LYRA, RIGAKU3)
• GLOSS, J.; HORKÝ, M.; KŘIŽÁKOVÁ, V.; FLAJŠMAN, L.; SCHMID, M.; URBÁNEK, M.; VARGA, P., 2019: The growth of metastable fcc Fe78Ni22 thin films on H-Si(100) substrates suitable for focused ion beam direct magnetic patterning. APPLIED SURFACE SCIENCE 469, p. 747 - 6, doi: 10.1016/j.apsusc.2018.10.263; FULL TEXT
  (ICON-SPM, KERR-MICROSCOPE, LYRA, UHV-DEPOSITION, UHV-PREPARATION, UHV-XPS)
• Mouralova, K.; Benes, L.; Zahradnicek, R.; Bednar, J.; Hrabec, P.; Prokes, T., Hrdy, R., 2019: Analysis of cut orientation through half-finished product using WEDM. MATERIALS AND MANUFACTURING PROCESSES 34(1), p. 70 - 82, doi: 10.1080/10426914.2018.1544714
  (LYRA, HELIOS, TITAN, TEGRAMIN)
• Hegrová, V., 2019: Application of correlative AFM/SEM microscopy. MASTER´S THESIS , p. 1 - 64
  (LYRA, LITESCOPE, MIRA, RIE-FLUORINE, EVAPORATOR, WIRE-BONDER)
• Novotný, O., 2019: Mechanical excitation of self sensing SPM probes. BACHELOR´S THESIS , p. 1 - 53
  (LYRA)
• Michlíček, M.; Manakhov, A.; Dvořáková, E.; Zajíčková, L., 2019: Homogeneity and penetration depth of atmospheric pressure plasma polymerization onto electrospun nanofibrous mats. APPLIED SURFACE SCIENCE 471, p. 835 - 841, doi: 10.1016/j.apsusc.2018.11.148
  (LYRA, MAGNETRON, FTIR, KRATOS-XPS)
• NOVOTNÁ, L.; KUČERA, L.; HAMPL, A.; DRDLÍK, D.; CIHLÁŘ, J.; CIHLÁŘ, J., 2019: Biphasic calcium phosphate scaffolds with controlled pore size distribution prepared by in-situ foaming. MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS 95, p. 363 - 8, doi: 10.1016/j.msec.2018.03.022; FULL TEXT
  (LYRA, RIGAKU3)
• Mouralova, K.; Prokes, T.; Benes, L., 2019: Surface and Subsurface Layers Defects Analysis After WEDM Affecting the Subsequent Lifetime of Produced Components. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING 44(9), p. 7723 - 7735, doi: 10.1007/s13369-019-03887-7
  (LYRA, TEGRAMIN, ICON-SPM)
• Mouralova K., Benes L., Bednar J., Zahradnicek R., Prokes T., Matousek R., Hrabec P., Fiserova Z., Otoupalik J., 2019: Using a DoE for a comprehensive analysis of the surface quality and cutting speed in WED-machined hadfield steel. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 33(5), p. 2371 - 2386, doi: 10.1007/s12206-019-0437-4
  (LYRA, TITAN, TEGRAMIN, NANOINDENTER, HELIOS)
• Mouralova, K.; Prokes, T.; Benes, L.; Bednar, J., 2019: The Influence of WEDM Parameters Setup on the Occurrence of Defects When Machining Hardox 400 Steel. MATERIALS 12(22), p. 3758-1 - 3758-15, doi: 10.3390/ma12223758
  (LYRA, TEGRAMIN, ICON-SPM, HELIOS, TITAN)
• Vacek, P.; Kostelník, P.; Gröger, R., 2019: Correlation of Structure and EBIC Contrast from Threading Dislocations in AlN/Si Films. PHYSICA STATUS SOLIDI B 256(11), p. 1900279-1 - 1900279-7, doi: 10.1002/pssb.201900279
  (LYRA, HELIOS, ICON-SPM)
• Mouralova, K.; Benes, L.; Prokes, T.; Zahradnicek, R.; Bednar, J.; Otoupalik, J.; Fiserova, Z.; Fiala, Z., 2019: Micro-milling machinability of pure molybdenum. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 102(9-12), p. 4153 - 4165, doi: 10.1007/s00170-019-03524-5
  (LYRA, HELIOS, TITAN, RIGAKU9, TEGRAMIN, ICON-SPM)
• Fecko, P., 2019: Gecko mimicking surfaces. MASTER´S THESIS , p. 1 - 52
  (SUSS-RCD8, SUSS-MA8, DWL, DRIE, LYRA, ALD, RIE-FLUORINE, ICON-SPM, PARYLENE, XEF2)
• Krajňák, T., 2019: Deposition of large organic molecules under UHV. MASTER´S THESIS , p. 1 - 58
  (LYRA, VERIOS, UHV-PREPARATION, KRATOS-XPS)
• Mazanova, V; Heczko, M; Skorik, V; Chlupova, A; Polak, J; Kruml, T, 2019: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 767, p. 138407-1 - 138407-14, doi: 10.1016/j.msea.2019.138407
  (LYRA)
• Horák, M., 2019: Electron microscopy and spectroscopy in plasmonics. DOCTORAL THESIS , p. 1 - 129
  (TITAN, HELIOS, VERIOS, LEICACOAT-STAN, EVAPORATOR, MAGNETRON, MIRA, LYRA, ICON-SPM)
• Mouralova, K.; Prokes, T.; Benes, L.; Sliwkova, P., 2019: Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography. MACHINING SCIENCE AND TECHNOLOGY , p. 1 - 17, doi: 10.1080/10910344.2019.1669166
  (LYRA, TEGRAMIN)
• Zábranský, L.; Souček, P.; Vašina, P.; Dugáček, J.; Sťahel, P.; Buršík, J.; Svoboda, M.; Mikšová, R.; Peřina, V.; Balázsi, K.; Czigány, Z.; Buršíková, V., 2019: Microstructural changes of amorphous Mo–B–C coatings upon thermal annealing. SURFACE AND COATINGS TECHNOLOGY 379, p. 125052-1 - 125052-7, doi: 10.1016/j.surfcoat.2019.125052
  (RIGAKU9, LYRA, TITAN)
• CASAS LUNA, M.; TAN, H.; TKACHENKO, S.; SALAMON, D.; MONTUFAR JIMENEZ, E., 2019: Enhancement of mechanical properties of 3D-plotted tricalcium phosphate scaffolds by rapid sintering. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 39(14), p. 4366 - 9, doi: 10.1016/j.jeurceramsoc.2019.05.055; FULL TEXT
  (LYRA, RIGAKU3)
• ČELKO, L.; MENELAOU, M.; CASAS LUNA, M.; HORYNOVÁ, M.; MUSÁLEK, T.; REMEŠOVÁ, M.; DÍAZ DE LA TORRE, S.; MORSI, K.; KAISER, J., 2019: Spark Plasma Extrusion and the Thermal Barrier Concept. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE 50(2), p. 656 - 10, doi: 10.1007/s11663-018-1493-3; FULL TEXT
  (LYRA)
• STÖGER-POLLACH, M.; BUKVIŠOVÁ, K.; SCHWARZ, S.; KVAPIL, M.; ŠAMOŘIL, T.; HORÁK, M., 2019: Fundamentals of cathodoluminescence in a STEM: The impact of sample geometry and electron beam energy on light emission of semiconductors. ULTRAMICROSCOPY 200, p. 111 - 14, doi: 10.1016/j.ultramic.2019.03.001; FULL TEXT
  (HELIOS, LYRA)
• HORÁK, M.; KŘÁPEK, V.; HRTOŇ, M.; KONEČNÁ, A.; LIGMAJER, F.; STÖGER-POLLACH, M.; ŠAMOŘIL, T.; PATÁK, A.; ÉDES, Z.; METELKA, O.; BABOCKÝ, J.; ŠIKOLA, T., 2019: Limits of Babinet’s principle for solid and hollow plasmonic antennas. SCIENTIFIC REPORTS 9, p. 1 - 11, doi: 10.1038/s41598-019-40500-1; FULL TEXT
  (FTIR, HELIOS, LYRA, MAGNETRON, SNOM-NANONICS, TITAN)
• MACH, J.; PIASTEK, J.; MANIŠ, J.; ČALKOVSKÝ, V.; ŠAMOŘIL, T.; FLAJŠMANOVÁ, J.; BARTOŠÍK, M.; VOBORNÝ, S.; KONEČNÝ, M.; ŠIKOLA, T., 2019: Low temperature selective growth of GaN single crystals on pre-patterned Si substrates. APPLIED SURFACE SCIENCE 497, p. 1 - 7, doi: 10.1016/j.apsusc.2019.143705; FULL TEXT
  (LYRA, WITEC-RAMAN)
• DYČKA, M.; DYČKOVÁ, L.; GEJDOŠ, P.; JULIŠ, M., 2019: Microstructural study of AZ91C magnesium alloy castings produced by investment casting in as-cast state and after heat treatment. METAL 2019 - 28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS , p. 1457 - 6; FULL TEXT
  (LYRA)
• DVOŘÁK, P.; KVAPIL, M.; BOUCHAL, P.; ÉDES, Z.; ŠAMOŘIL, T.; HRTOŇ, M.; LIGMAJER, F.; KŘÁPEK, V.; ŠIKOLA, T., 2018: Near-field digital holography: a tool for plasmon phase imaging. NANOSCALE 10(45), p. 21363 - 7, doi: 10.1039/c8nr07438k; FULL TEXT
  (SNOM-NANONICS, LYRA)
• Jiao, Z.; Michalicka, J.; Was, G.S., 2018: Self-ion emulation of high dose neutron irradiated microstructure in stainless steels. JOURNAL OF NUCLEAR MATERIALS 501, p. 312 - 318, doi: 10.1016/j.jnucmat.2018.01.054
  (LYRA, HELIOS, TITAN)
• Motyčková, L., 2018: Epitaxial growth and characterization of metamagnetic nanoparticles for biomedical applications. BACHELOR´S THESIS , p. 1 - 55
  (MAGNETRON, ICON-SPM, LYRA, CRYOGENIC)
• ARREGI URIBEETXEBARRIA, J.; HORKÝ, M.; FABIANOVÁ, K.; TOLLEY, R.; FULLERTON, E.; UHLÍŘ, V., 2018: Magnetization reversal and confinement effects across the metamagnetic phase transition in mesoscale FeRh structures. JOURNAL OF PHYSICS D - APPLIED PHYSICS 51(10), p. 1 - 12, doi: 10.1088/1361-6463/aaaa5a; FULL TEXT
  (MIRA, LYRA, MAGNETRON)
• MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T., 2018: Effect of width of kerf on machining accuracy and subsurface layer after WEDM. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 27(4), p. 1908 - 9, doi: 10.1007/s11665-018-3239-4; FULL TEXT
  (LYRA, TEGRAMIN)
• Mouralova, K.; Benes, L.; Zahradnicek, R.; Bednar, J.; Hrabec, P.; Prokes, T.; Matousek, R.; Fiala, Z., 2018: Quality of surface and subsurface layers after WEDM aluminum alloy 7475-T7351 including analysis of TEM lamella. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 99(9-12), p. 2309 - 2326, doi: 10.1007/s00170-018-2626-1
  (LYRA, ICON-SPM, HELIOS, TITAN, TEGRAMIN, NANOINDENTER)
• MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J.; BENEŠ, L.; ZAHRADNÍČEK, R., 2018: Analysis of the surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT, JOURNAL OF THE INTERNATIONAL MEASUREMENT CONFEDERATION (IMEKO) 114, p. 169 - 8, doi: 10.1016/j.measurement.2017.09.040; FULL TEXT
  (LYRA, TEGRAMIN)
• MONTUFAR JIMENEZ, E.; CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; FOHLEROVÁ, Z.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J., 2018: High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures. ACTA BIOMATERIALIA 70, p. 293 - 11, doi: 10.1016/j.actbio.2018.02.002; FULL TEXT
  (LYRA, micro-CT-L240, RIGAKU3)
• BŘÍNEK, L.; KVAPIL, M.; ŠAMOŘIL, T.; HRTOŇ, M.; KALOUSEK, R.; KŘÁPEK, V.; SPOUSTA, J.; DUB, P.; VARGA, P.; ŠIKOLA, T., 2018: Plasmon Resonances of Mid-IR Antennas on Absorbing Substrate: Optimization of Localized Plasmon-Enhanced Absorption upon Strong Coupling Effect. ACS PHOTONICS 5(11), p. 4378 - 8, doi: 10.1021/acsphotonics.8b00806; FULL TEXT
  (LYRA, FTIR)
• MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BLAŽÍK, P.; KALIVODA, M.; KOUSAL, P., 2018: Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. MEASUREMENT, JOURNAL OF THE INTERNATIONAL MEASUREMENT CONFEDERATION (IMEKO) 116, p. 556 - 9, doi: 10.1016/j.measurement.2017.11.053; FULL TEXT
  (LYRA, TEGRAMIN)
• Balíček, M., 2018: Analysis Of Wear On Cutting Edges During Turning Of Main Steels. MASTER´S THESIS , p. 1 - 83
  (LYRA)
• PRAJZLER, V.; SALAMON, D.; MACA, K., 2018: Pressure-less rapid rate sintering of pre-sintered alumina and zirconia ceramics. CERAMICS INTERNATIONAL 44(9), p. 10840 - 7, doi: 10.1016/j.ceramint.2018.03.132; FULL TEXT
  (LYRA)
• Robl, J., 2018: Use Of Additive Technology For The Production Concept Of Turbocharger Components. BACHELOR´S THESIS , p. 1 - 66
  (LYRA, HELIOS, TITAN)
• TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L., 2018: Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR 412-413, p. 49 - 11, doi: 10.1016/j.wear.2018.05.016; FULL TEXT
  (LYRA, RIGAKU3)
• URBÁNEK, M.; FLAJŠMAN, L.; KŘIŽÁKOVÁ, V.; GLOSS, J.; HORKÝ, M.; SCHMID, M.; VARGA, P., 2018: Research Update: Focused ion beam direct writing of magnetic patterns with controlled structural and magnetic properties. APL MATERIALS 6(6), p. 060701-1 - 7, doi: 10.1063/1.5029367; FULL TEXT
  (LYRA, HELIOS, UHV-XPS, UHV-PREPARATION, UHV-DEPOSITION, ICON-SPM, RIGAKU9, KERR-MICROSCOPE)
• Kaushik, P.; Elias, M.; Prasek, J.; Pytlicek, Z.; Zajickova, L., 2018: Titanium dioxide modified multi-walled carbon nanotubes as room temperature NH3 gas sensors. ELECTRONICS TECHNOLOGY (ISSE) , p. 959 - 961
  (ALD, TERS, LYRA)
• TKACHENKO, S.; HORYNOVÁ, M.; CASAS LUNA, M.; DÍAZ DE LA TORRE, S.; DVOŘÁK, K.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E., 2018: Strength and fracture mechanism of iron reinforced tricalcium phosphate cermet fabricated by spark plasma sintering. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS 81, p. 16 - 10, doi: 10.1016/j.jmbbm.2018.02.016; FULL TEXT
  (LYRA, RIGAKU3)
• Bělka, M., 2018: In vitro study of the effect of particle characteristics and flow rate on regional deposition in human airways. PH.D. THESIS , p. 1 - 121
  (LYRA)
• DRDLÍK, D.; ROLEČEK, J.; DRDLÍKOVÁ, K.; SALAMON, D., 2018: Restraining of calcium contamination in near-net shape alumina ceramics during slip casting. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY 15(6), p. 1559 - 8, doi: 10.1111/ijac.13042; FULL TEXT
  (LYRA, SIMS)
• Rudolfová, Z., 2018: Creation of nanostructures on surfaces of solid matter using hybrid methods. PH.D. THESIS , p. 1 - 75
  (LYRA)
• MOURALOVÁ, K.; KLAKURKOVÁ, L.; MATOUŠEK, R.; PROKEŠ, T.; HRDÝ, R.; KAŇA, V., 2018: Influence of the Cut Direction through the Semi-Finished Product on the Occurrence of Cracks for X210Cr12 Steel Using WEDM. ARCH CIV MECH ENG 18(4), p. 1318 - 14, doi: 10.1016/j.acme.2018.04.004; FULL TEXT
  (LYRA, TEGRAMIN)
• Křižáková, V., 2018: Spin wave excitation and propagation in magnonic crystals prepared by focused ion beam direct writing. MASTER´S THESIS , p. 1 - 83
  (LYRA, HELIOS, ICON-SPM, MIRA, EVAPORATOR, WIRE-BONDER, KERR-MICROSCOPE)
• Dvořák, P., 2018: Nanophotonics. PH.D. THESIS , p. 1 - 134
  (SNOM-NANONICS, LYRA, TERS, EVAPORATOR, FTIR, WOOLLAM-VIS)
• BABOCKÝ, J.; KŘÍŽOVÁ, A.; ŠTRBKOVÁ, L.; KEJÍK, L.; LIGMAJER, F.; HRTOŇ, M.; DVOŘÁK, P.; TÝČ, M.; ČOLLÁKOVÁ, J.; KŘÁPEK, V.; KALOUSEK, R.; CHMELÍK, R.; ŠIKOLA, T., 2017: Quantitative 3D phase imaging of plasmonic metasurfaces. ACS PHOTONICS 4(6), p. 1389 - 9, doi: 10.1021/acsphotonics.7b00022; FULL TEXT
  (MIRA, LYRA, EVAPORATOR)
• Hegrová, V., 2017: Fabrication and application of graphene-metal heterostructures in biosensing by surface enhanced Raman spectroscopy. BACHELOR´S THESIS , p. 1 - 37
  (TERS, LYRA, ICON-SPM)
• CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L., 2017: Tricalcium Phosphate - Magnesium Interface: Microstructure and Properties. SOLID STATE PHENOMENA 258, p. 412 - 4, doi: 10.4028/www.scientific.net/SSP.258.412; FULL TEXT
  (LYRA, micro-CT-L240, RIGAKU3)
• Hrubý, J., 2017: Preparation and Characterization of Graphene Based Hybrid Materials. MASTER´S THESIS , p. 1 - 91
  (TERS, LYRA)
• DVOŘÁK, P.; ÉDES, Z.; KVAPIL, M.; ŠAMOŘIL, T.; LIGMAJER, F.; HRTOŇ, M.; KALOUSEK, R.; KŘÁPEK, V.; DUB, P.; SPOUSTA, J.; VARGA, P.; ŠIKOLA, T., 2017: Imaging of near-field interference patterns by a-SNOM – influence of illumination wavelength and polarization state. OPTICS EXPRESS 25(14), p. 16560 - 13, doi: 10.1364/OE.25.016560; FULL TEXT
  (LYRA, EVAPORATOR, SNOM-NANONICS)
• Krajňák, T., 2017: Analysis of Localy Modified Surfaces for Selective Growth of Cobalt. BACHELOR´S THESIS , p. 1 - 42
  (LYRA, KRATOS-XPS)
• KORMOŠ, L.; KRATZER, M.; KOSTECKI, K.; OEME, M.; ŠIKOLA, T.; KASPER, E.; SCHULZE, J.; TEICHERT, C., 2017: Surface analysis of epitaxially grown GeSn alloys with Sn contents between 15% and 18%. SURFACE AND INTERFACE ANALYSIS 49(4), p. 297 - 6, doi: 10.1002/sia.6134; FULL TEXT
  (LYRA)
• Jaskowiec, J., 2017: Magnetic Force Microscopy and Transport Properties of Metamagnetic Nanostructures. BACHELOR´S THESIS , p. 1 - 47
  (MAGNETRON, MIRA, RAITH, ICON-SPM, CRYOGENIC, LYRA)
• DRDLÍK, D.; DRDLÍKOVÁ, K.; HADRABA, H.; MACA, K., 2017: Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37(14), p. 4265 - 6, doi: 10.1016/j.jeurceramsoc.2017.02.043; FULL TEXT
  (LYRA, TITAN)
• HOJNÁ, A.; MICHALIČKA, J.; HADRABA, H.; DI GABRIELE, F.; DUCHOŇ, J.; ROZUMOVÁ, L.; HUSÁK, R., 2017: Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas. METALS 7(12), p. 560-1 - 17, doi: 10.3390/met7120560; FULL TEXT
  (LYRA, TITAN)
• Vaňatka, M., 2017: Fabrication and characterization of nanostructures with functional properties in the field of spintronics. TREATISE TO STATE DOCTORAL EXAM , p. 1 - 31
  (TITAN, MIRA, EVAPORATOR, MAGNETRON, WIRE-BONDER, LYRA)
• Drdlikova, K; Klement, R; Drdlik, D; Spusta, T; Galusek, D; Maca, K, 2017: Luminescent Er3+ doped transparent alumina ceramics. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37(7), p. 2695 - 2703, doi: 10.1016/fleurceramsoc.2017.02.017
  (LYRA)
• KALOUSEK, R.; SPOUSTA, J.; ZLÁMAL, J.; DUB, P.; ŠIKOLA, T.; SHEN, Z.; SALAMON, D.; MACA, K., 2017: Rapid heating of zirconia nanoparticle-powder compacts by infrared radiation heat transfer. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37(3), p. 1067 - 6, doi: 10.1016/j.jeurceramsoc.2016.10.004; FULL TEXT
  (LYRA)
• Michalička, J.; Jiao, Z.; Was, G., 2017: Radiation-Induced Precipitates in a Self-ion Irradiated Cold-Worked 316 Austenitic Stainless Steel Used for PWR Baffle-Bolt. PROCEEDING OF TMS 18TH ENVIRONMENTAL DEGRADATION CONFERENCE OF MATERIALS IN NUCLEAR POWER SYSTEMS – WATER REACTORS 1, p. 565 - 580, doi: https://doi.org/10.1007/978-3-319-67244-1
  (TITAN, LYRA, HELIOS)
• MACA, K.; POUCHLÝ, V.; DRDLÍK, D.; HADRABA, H.; CHLUP, Z., 2017: Dilatometric study of anisotropic sintering of alumina/zirconialaminates with controlled fracture behaviour. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37(14), p. 4287 - 9, doi: 10.1016/j.jeurceramsoc.2017.04.030; FULL TEXT
  (LYRA)
• BARTOŠÍK, M.; KORMOŠ, L.; FLAJŠMAN, L.; KALOUSEK, R.; MACH, J.; LIŠKOVÁ, Z.; NEZVAL, D.; ŠVARC, V.; ŠAMOŘIL, T.; ŠIKOLA, T., 2017: Nanometer-Sized Water Bridge and Pull-Off Force in AFM at Different Relative Humidities: Reproducibility Measurement and Model Based on Surface Tension Change. JOURNAL OF PHYSICAL CHEMISTRY B 121(3), p. 610 - 10, doi: 10.1021/acs.jpcb.6b11108; FULL TEXT
  (LYRA)
• PAPEŽ, N.; SOBOLA, D.; ŠKARVADA, P.; ŠKVARENINA, Ľ.; HEMZAL, D.; TOFEL, P.; GRMELA, L., 2017: Degradation analysis of GaAs solar cells at thermal stress. APPLIED SURFACE SCIENCE 461, p. 105 - 1, doi: 10.1016/j.apsusc.2018.05.093; FULL TEXT
  (LYRA)
• DRDLÍKOVÁ, K.; KLEMENT, R.; HADRABA, H.; DRDLÍK, D.; GALUSEK, D.; MACA, K., 2017: Luminescent Eu3+-doped transparent alumina ceramics with high hardness. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37(14), p. 4271 - 7, doi: 10.1016/j.jeurceramsoc.2017.05.007; FULL TEXT
  (LYRA)
• CASAS LUNA, M.; TKACHENKO, S.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E., 2017: Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. ACTA METALLURGICA SINICA (ENGLISH LETTERS) 30(4), p. 319 - 7, doi: 10.1007/s40195-017-0560-0; FULL TEXT
  (LYRA, RIGAKU3)
• ROLEČEK, J.; FORAL, Š.; KATOVSKÝ, K.; SALAMON, D., 2017: A Feasibility study of using of CeO2 as a surrogate material during investigation of UO2 thermal conductivity enhancement . ADVANCES IN APPLIED CERAMICS 116(3), p. 123 - 9, doi: 10.1080/17436753.2016.1264122; FULL TEXT
  (LYRA)
• SOPHA, H.; ŠAMOŘIL, T.; PÁLESCH, E.; HROMÁDKO, L.; ZAZPE, R.; ŠKODA, D.; URBÁNEK, M.; NG, S.; PŘIKRYL, J.; MACÁK, J., 2017: Ideally Hexagonally Ordered TiO2 Nanotube Arrays. CHEMISTRYOPEN 6(4), p. 480 - 4, doi: 10.1002/open.201700108; FULL TEXT
  (LYRA, ICON-SPM)
• OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P., 2017: Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. SURFACE AND COATINGS TECHNOLOGY 318, p. 374 - 8, doi: 10.1016/j.surfcoat.2017.03.003; FULL TEXT
  (LYRA)
• Manakhov, A; Kedronova, E; Medalova, J; Cernochova, P; Obrusnik, A; Michlicek, M; Shtansky, DV; Zajickova, L, 2017: Carboxyl-anhydride and amine plasma coating of PCL nanofibers to improve their bioactivity. MATERIALS & DESIGN 132, p. 257 - 265, doi: 10.1016/j.matdes.2017.06.057
  (LYRA, LEICACOAT-NANO, KRATOS-XPS)
• MACH, J.; PROCHÁZKA, P.; BARTOŠÍK, M.; NEZVAL, D.; PIASTEK, J.; HULVA, J.; ŠVARC, V.; KONEČNÝ, M.; KORMOŠ, L.; ŠIKOLA, T., 2017: Electronic transport properties of graphene doped by gallium. NANOTECHNOLOGY 28(41), p. 1 - 10, doi: 10.1088/1361-6528/aa86a4; FULL TEXT
  (DIENER, DWL, EVAPORATOR, WIRE-BONDER, LYRA)
• Jemelka, M., 2017: Microstructure Revealing and Analysis of Partially Sintered Oxide Ceramic Materials. BACHELOR´S THESIS , p. 1 - 52
  (LYRA)
• MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T.; HORYNOVÁ, M., 2017: Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT, JOURNAL OF THE INTERNATIONAL MEASUREMENT CONFEDERATION (IMEKO) 104, p. 12 - 9, doi: 10.1016/j.measurement.2017.03.009; FULL TEXT
  (LYRA)
• MANAKHOV, A.; LANDOVÁ, M.; MEDALOVÁ, J.; MICHLÍČEK, M.; POLČÁK, J.; NEČAS, D.; ZAJÍČKOVÁ, L., 2017: Cyclopropylamine plasma polymers for increased cell adhesion and growth. PLASMA PROCESSES AND POLYMERS 14(7), p. e1600123-1 - 12, doi: 10.1002/ppap.201600123; FULL TEXT
  (LYRA, ICON-SPM, DEKTAK)
• DRDLÍK, D.; SLÁMA, M.; HADRABA, H.; DRDLÍKOVÁ, K.; CIHLÁŘ, J., 2016: On the role of the indifferent electrolyte LiCl in electrophoretic deposition of hydroxyapatite from 2-propanol dispersions. CERAMICS INTERNATIONAL 42(15), p. 16529 - 6, doi: 10.1016/j.ceramint.2016.07.071; FULL TEXT
  (LYRA)
• Horký, M., 2016: Growth of Metastable FCC FE Thin Films on Cu(100)/Si(100) Substrates. MASTER´S THESIS , p. 1 - 96
  (UHV-PREPARATION, UHV-XPS, UHV-SPM, ICON-SPM, LYRA, VERIOS, UHV-LEIS, KRATOS-XPS, RIGAKU3)
• Musálek, T., 2016: Semiconductor nanowire growth utilizing alloyed catalyst. MASTER’S THESIS , p. 1 - 52
  (UHV-MBE, VERIOS, LYRA, MIRA, ALD)
• Andrýsek, M., 2016: Preparation of surfaces with diffusion barrier for studying initial phase of semiconductor nanowire growth. BACHELOR’S THESIS , p. 1 - 22
  (LYRA, VERIOS, ALD, TERS)
• Fabianová, K., 2016: Fabrication of well defined nanoporous structures with application in membrane sensing. BACHELOR’S THESIS , p. 1 - 54
  (PECVD, MIRA, LYRA, RIE-FLUORINE, NANOCALC, MAGNETRON, EVAPORATOR)
• MANAKHOV, A.; MICHLÍČEK, M.; NEČAS, D.; POLČÁK, J.; MAKHNEVA, E.; ELIÁŠ, M.; ZAJÍČKOVÁ, L., 2016: Carboxyl-rich coatings deposited by atmospheric plasma co-polymerization of maleic anhydride and acetylene. SURFACE AND COATINGS TECHNOLOGY 295, p. 37 - 9, doi: 10.1016/j.surfcoat.2015.11.039; FULL TEXT
  (FTIR, ICON-SPM, LYRA, MAGNETRON)
• J.Matějíček, M. Vilémová, H. Hadraba, F. Di Gabriele, I. Kuběna, E. Kolíbalová, J. Michalička, J. Čech, A. Jäger, 2016: Behavior of W-based materials in hot helium gas. NUCLEAR MATERIALS AND ENERGY 9, p. 405 - 6, doi: 10.1016/j.nme.2016.03.009; FULL TEXT
  (LYRA)
• MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; CASAS LUNA, M.; DIAZ-DE-LA-TORRE, S.; ČELKO, L.; KLAKURKOVÁ, L.; SPOTZ, Z.; DIÉGUEZ-TREJO, G.; FOHLEROVÁ, Z.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J., 2016: Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium phosphate CerMets for orthopaedic applications. JOM 68(4), p. 1134 - 9, doi: 10.1007/s11837-015-1806-9; FULL TEXT
  (LYRA, RIGAKU3)
• MOURALOVÁ, K.; MATOUŠEK, R.; KOVÁŘ, J.; MACH, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J., 2016: Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel . MEASUREMENT, JOURNAL OF THE INTERNATIONAL MEASUREMENT CONFEDERATION (IMEKO) 94, p. 771 - 9, doi: 10.1016/j.measurement.2016.09.028; FULL TEXT
  (LYRA)
• Duda, R., 2015: Analysis of Nanostructures by TOF-LEIS. PH.D. THESIS , p. 1 - 91
  (LYRA)
• Šamořil, T., 2015: Application of the focused ion and electron beam in nanotechnologies. PH.D. THESIS , p. 1 - 126
  (LYRA, FTIR)
• Mouralová, K., 2015: Modern technologies in wire electrical discharge machining the metal alloys. PH.D. THESIS , p. 1 - 98
  (LYRA)
• Lišková, Z., 2015: Fabrication of Nanostructures and Nanodevices for Nanoelectronics and Spintronics. PH.D. THESIS , p. 1 - 106
  (LYRA, MIRA, DIENER, NANOCALC, DWL, EVAPORATOR, WIRE-BONDER, ALD)
• Břínek, L., 2015: Application of Plasmon Polaritons in Nanophotonics. PH.D. THESIS , p. 1 - 75
  (FTIR, LYRA, MIRA, TERS)
• Švarc, V., 2015: Shielding effect of oxide isolating layer on surface potential measured by Kelvin probe force microscopy. MASTER´S THESIS , p. 1 - 50
  (LYRA, ALD, DIENER, WIRE-BONDER)
• Kormoš, L., 2015: Application of Graphene Membrane in Nanoelectronic Devices. MASTER´S THESIS , p. 1 - 59
  (LYRA, DIENER, WIRE-BONDER)
• Knotek, M., 2015: Selective growth of GaN nanostructures on silicon substrates. MASTER´S THESIS , p. 1 - 68
  (DEKTAK, LYRA, ICON-SPM, TERS)
• URBÁNEK, M.; UHLÍŘ, V.; LAMBERT, C.; KAN, J.; EIBAGI, N.; VAŇATKA, M.; FLAJŠMAN, L.; KALOUSEK, R.; IM, M.; FISCHER, P.; ŠIKOLA, T.; FULLERTON, E., 2015: Dynamics and efficiency of magnetic vortex circulation reversal. PHYSICAL REVIEW B 91(9), p. 094415-1 - 11, doi: 10.1103/PhysRevB.91.094415; FULL TEXT
  (MIRA, LYRA, WIRE-BONDER)
• Kvapil, M., 2015: Plasmonic Antennas. PH.D. THESIS , p. 1 - 104
  (FTIR, NANOCALC, LYRA, TERS, DIENER)
• Manakhov, A; Zajickova, L; Elias, M; Cechal, J; Polcak, J; Hnilica, J; Bittnerova, S; Necas, D, 2014: Optimization of Cyclopropylamine Plasma Polymerization toward Enhanced Layer Stability in Contact with Water. PLASMA PROCESSES AND POLYMERS 11(6), p. 532 - 544, doi: 10.1002/ppap.201300177
  (LYRA, FTIR, DEKTAK)

Show more publications...